Induction separator ReSortika BF
Sensor sorters based on induction coils used for separating materials by electrical conductivity.
-
Recovery of secondary metals
-
Separation of secondary metals by type (ferrous and non-ferrous metals, stainless steel)
-
Quick and easy setup
-
Automatic cleaning of the feed zone
-
Affordable and fast maintenance service
-
Performance confirmation at ERGA Test Center
Operation Principle
Industries
Induction sensor separator provides separation of metals from 20 mm to 400 mm with recovery efficiency up to 96%.
- Fields of application: recycling
- Recovery of metals from: plastic, rubber, glass, household appliances, electronic waste, municipal waste, incinerator ash, construction waste, wood, steel slag, etc.
- Separation of ferrous and stainless alloys from non-ferrous metals
- Recovery of secondary metals
Induction sensor separators are conveyor separators equipped with an inductive sensor unit located under the belt. Such sensors detect the presence of metals in the material that crosses their induction field as it moves along the conveyor belt. The metal detection signal is sent to the control unit, which activates the pneumatic valves.
- Separation of secondary metals by type
Induction sensor separators are applied for solving the problem of separating of a mixture of secondary metals into ferrous, stainless and non-ferrous alloys through fine adjustment of induction sensors.
- Complete solution
The separator can be used downstream ERGA EddyFlow eddy current separators to maximize the recovery of secondary metals. Due to low electrical conductivity of some alloys (stainless steel, zinc, and others), some metals may be left in the ECS tailings.
The use of Induction separator ReSortika BF in a complex with eddy current separators will increase the efficiency of metal recovery.
Convenient and fast equipment setup
The control panel is a 17-inch high-definition touch screen, which is convenient for setting the separation mode. The developed software with user friendly interface allows to quickly customize the equipment for individual material characteristics and has 3 levels of access (worker, engineer, service technician). In addition to adjusting the basic operating parameters of the product, the settings of the separation parameters for each type of material can be saved.
- Automatic cleaning of the feed zone
Automated cleaning of the conveyor belt can eliminate downtime and maintain efficiency without operator intervention and long maintenance stops.
- Remote monitoring and control
Remote monitoring and control system REMOS allows to monitor separation parameters and promptly adjust the equipment to changes in the characteristics of incoming raw materials (changes in composition, transparency, and size of inclusions).
- Having difficulties choosing or haven’t found what you are looking for?
Contact us in any convenient way and we will find the right solution for you.
We welcome you to conduct a trial test of your materials* in our Test Center. It is a special opportunity to evaluate the efficiency of our equipment in real conditions.
|
Equipment model |
Number of rejection stages |
Working area length, mm |
Power, kW |
Overall dimensions (DxWxH), mm |
|---|---|---|---|---|
|
ReSortika BF 1400-1 |
1 |
1400 |
5,5 |
7024х2188х2246 |
|
ReSortika BF 2000-1 |
1 |
2000 |
7,5 |
7032х2751х2246 |
|
ReSortika BF 2800-1 |
1 |
2800 |
9,0 |
7032х3560х2246 |
|
ReSortika BF 1400-2 |
2 |
1400 |
6,5 |
7024х2188х2246 |
|
ReSortika BF 2000-2 |
2 |
2000 |
8,5 |
7032х2751х2246 |
|
ReSortika BF 2800-2 |
2 |
2800 |
10,0 |
7032х3560х2246 |
You can additionally order a spare parts kit to ensure continuous operation of the equipment:
- Conveyor belt
- Lighting module
- Ejector unit
REMOS remote monitoring system can be integrated with this type of equipment, which allows to monitor the separator status in real time.
Available options:
- Access to complete device operation information (operation/idle, operating modes, error decoding, magnetic bar position, cleaning period)
- Power supply status sensor
- Electric motor operation control (if frequency converter is installed)
- Position monitoring sensor for input circuit breakers and contactors
- Equipment downtime control
- Door status control (open/closed)
- Pneumatic system pressure sensor
- Device operating mode (off, on)
- Humidity sensor
- Temperature sensor
