ERGUARD CM conveyor non-dismountable metal detector
High-sensitivity industrial metal detector for detection of tramp metal in conveyed raw materials, semi-finished and finished products
-
High sensitivity to metal inclusions
-
Quality and product safety control
-
Protection of expensive equipment from damage and premature wear
-
IP rating of product/sensors: IP54/IP65
-
Automatic self-diagnostic system
-
Remote control panel
-
High tolerance to vibrations
-
Touch Screen intuitive control
-
Visual and sound alarm
-
Stainless steel casing
-
Certificate of conformity to requirements of (technical regulations of the Customs Union) TR CU
Operation Principle

Industries
High-sensitivity conveyor metal detector ERGUARD CM with non-dismountable casing is designed for quality control and safety inspection of raw materials, semi-finished and finished products transported by belt conveyor.
- Stainless steel casing
Casing of ERGUARD CM metal detector is made as all-welded stainless steel construction- durable and not corrodible. Extended package of CM metal detector is supplied complete with an integrated conveyor and does not require any additional line redesign. The installation takes only a few hours.
- High sensitivity to metal inclusions
ERGUARD CM metal detector significantly outclasses ERGUARD DCM, SCM in terms of sensitivity and provides maximum sensitivity in detecting inclusions of ferrous metal (Fe) Ø ≥ 0.5 mm, nonferrous metals (non-Fe) Ø ≥ 1.0 mm, stainless steel Ø ≥ 1.0 mm. High sensitivity allows for detector setup to protect equipment from wear and eliminate false rejects and line stoppage.
The above values are obtained under ideal conditions and can vary depending on the size of the aperture, detector operating frequency, unique properties of the products, location of inclusions in the flow and conditions of the process environment.
When metal inclusions are detected, the metal detector emits a sound / light signal and depending on selected option stops the conveyor, labels or rejects the contaminated product from the conveyor belt.
The sensor has ambient class NF4 design (ambient temperature - 60 / + 40 °С), which allows working in a wide temperature range.
- Quality and product safety control
ERGUARD CM high sensitivity metal detectors are commonly applied as inspection equipment for thorough safety inspection of raw materials, semi-finished and finished products, eliminating defects and claims.
- Protection of process equipment from damage and premature wear
ERGUARD CM conveyor metal detector reduces wear, prevents damage and downtime of crushing and size reduction equipment and eliminates resulting financial losses.
- Touch Screen intuitive control
The control panel is a 7-inch high-definition touch screen with user-friendly interface: 3 levels of access to settings (operator, engineer, service specialist) are provided to prevent unauthorized access.
- Storing up to 10 materials in memory
Individual settings for specific material are stored in the system memory, designed for 10 items.
- Conformity with technical regulations of the Customs Union
The equipment corresponds to requirements of technical regulations of the Customs Union TR CU 004/2011 “On Safety of low-voltage equipment” and TR CU 020/2011 “Electromagnetic compatibility of technical equipment”. All required certificates are included in the scope of supply.
- Have difficulties choosing or haven’t found what you are looking for?
Please, fill in the questionnaire on our site and we will select the most suitable solution to you.
Series-produced models of ERGUARD CM conveyor non-dismountable metal detectors with different options are given in the table. Tailored solutions can be designed according to the order requirements.
Model | Dimensions (LхWхH), mm | Max. power consumption, W | Weight, kg |
---|---|---|---|
ERGUARD CM 250х125 | 630х330х455 | 70 | 45 |
ERGUARD CM 400х200 | 833х330х480 | 70 | 50 |
ERGUARD CM 400х300 | 834х330х550 | 70 | 60 |
ERGUARD CM 600х200 | 1070х500х480 | 150 | 80 |
ERGUARD CM 600x400 | 1070х500х680 | 150 | 100 |
ERGUARD CM 600x600 | 1070х500х880 | 150 | 120 |
ERGUARD СМ 700х400 | 1170х500х680 | 150 | 120 |
ERGUARD CM 900х100 | 1277х330х455 | 400 | 75 |
ERGUARD CM 1100х100 | 1477х330х455 | 400 | 100 |
ERGUARD CM 1300х100 | 1677х330х455 | 400 | 120 |
ERGUARD CM with conveyor 250x125 | 1000х700х1100 | 0,4 kW | 110 |
ERGUARD CM with conveyor 4000x200 | 1000х900х1100 | 0,6 kW | 120 |
ERGUARD CM with conveyor and reject device 250x125 | 1200х700х1100 | 0,6 kW | 130 |
ERGUARD CM with conveyor and reject device 400х200 | 1200х900х1100 | 0,8 kW | 150 |
ERGUARD CM with conveyor and reject device 900х100 | 1500х1255х1100 | 0,9 kW | 250 |
You can additionally order spare parts kit to ensure continuous operation of the equipment:
- lining
- belt
You can optionally order a set of spare parts to ensure continuous operation of the equipment in extended configuration with a built-in conveyor and a rejection unit:
- Access to complete information about operation of the machine (operation / idle, operating modes, error decoding, position of magnetic rods, cleaning period)
- Power supply sensor
- Incoming switch and contactors position control sensor
- Equipment downtime monitoring
- Door status control (open / closed)
- Shock / vibration sensor
- Humidity sensor
- Temperature sensor